
Form Release Agents Cures Seals Etc. Form Treatments Testimonials Contacts Specs MSDS Properties Form Sprayers Order FREE Literature Cleaners Instructional Literature Regulations Trade Shows Related Industry Links Aerosols

IDENTIFICATION
COMPOSITIONAL INFORMATION This section is condensed. For complete information please request our printed MSDS or e-mail us, Cresset@Cresset.com, with your name, address, etc. for quicker response.
|
||||||||||||||||
|
ROUTE(S) OF EXPOSURE AND HEALTH EFFECTS
|
||||||||||||||||
|
FIRST AID PROCEDURES
|
||||||||||||||||
|
PHYSICAL DATA
|
||||||||||||||||
|
FIRE FIGHTING PROCEDURES AND EXTINGUISHING MEDIA Foam, water spray (fog), dry chemical, carbon dioxide and vaporizing liquid type extinguishing agents may all be suitable for extinguishing fires involving this type of product depending on size or potential size of fire and circumstances related to the situation. Plan fire protection and response strategy through consultation with local fire protection authorities or appropriate specialists. Self-contained breathing apparatus and full protective clothing should be worn. |
||||||||||||||||
|
REACTIVITY
|
||||||||||||||||
SPILL OR LEAK PROCEDURES Prevent ignition, stop leak, ventilate area, contain spill by diking or impounding. Add sand, earth or other suitable absorbent to spill area. Wear respiratory protection for large spill, leak or release. Prevent product from entering sewers, storm drains, surface waters and soil. |
||||||||||||||||
|
DISPOSAL METHODS Dispose of contaminated product and materials used in the cleaning of spills or leaks in a manner complying with Federal, State and Local regulations. |
||||||||||||||||
|
PROTECTION INFORMATION EYES: Use splash proof chemical goggles or face
shield when eye contact may occur. |
||||||||||||||||
|
DOT and EPA (Not required for MSDS) When transported by ground in 1 gallon bottles, 5
gallon pails, 55 gallon drums, packaged and sealed by Cresset Chemical Company, this
product is not regulated by the US-DOT. When transported in 275 gallon MegaPaks,
must use other US-DOT regulations. See "Ground Shipping...Cresset
Products" for details. |
||||||||||||||||
|
CORPORATE STATEMENT The information and recommendations contained herein are, to the best of Cresset Chemical Company's knowledge and belief, accurate and reliable as of the date issued. Cresset Chemical Company does not warrant or guarantee their accuracy or reliability, and shall not be liable for any loss or damage arising out of the use thereof. The information and recommendations are offered for the user's consideration and examination, and it is the user's responsibility to satisfy itself that they are suitable and complete for its particular use. |
||||||||||||||||
Other Material Safety Data Sheets:
Index of All Cresset's Material Safety Data Sheets
Store-Cote RP-6 Rust Preventative
Crete-Lease "Break-In" Aluminum Form Conditioner
Form Cleaner 240 Rust Remover
Form Release Agents Cures Seals Etc. Form Treatments Testimonials Contacts Specs MSDS Properties Form Sprayers Order FREE Literature Cleaners Instructional Literature Regulations Trade Shows Related Industry Links Aerosols
Return to Form Treatments Page
Cresset, Spatter-Cote, Store-Cote and Crete-Lease are trade marks of Cresset Chemical Company.
Copyright © 2008, Cresset Chemical Company.
All rights reserved.