CRESSET CHEMICAL COMPANY
Form Release Agents Cures Seals Etc. Form Treatments Testimonials Contacts Specs MSDS Properties Form Sprayers Order FREE Literature Cleaners Instructional Literature Regulations Trade Shows Related Industry Links Aerosols
Crete-Lease® Xtra Release Agents:
|
Crete-Lease |
A soy based release agent. Sprays at 20ºF. Biodegradable. See Specification Sheet or Material Safety Data Sheet (MSDS). Exceeds Sept VOC Regs. |
| Crete-Lease 20-VOC-Xtra Release Agent Testimonials
|
For CCS 1 or CCS 2 surface from any form or formliner;
water-based; meets OSHA, EPA and the lowest VOC rules. Also available in aerosol spray can. See
Specification
Sheet or Material Safety Data Sheet (MSDS).
Available in Aerosol.
Exceeds Sept VOC Regs.
|
| Crete-Lease 880-VOC-Xtra Release Agent
|
Meets OSHA, EPA and the lowest VOC rules, vegetable/mineral oil based superplasticized and SCC concrete. Produces high visual impact concrete. See Specification Sheet or Material Safety Data Sheet (MSDS). Exceeds Sept VOC Regs. |
| Crete-Lease
880-VOC Release Agent
Testimonials "...high grade, top-of-the-line"
|
For CCS 1 or CCS 2 surface; minimizes bugholes even with
super-plasticized concrete; exceeds VOC regulations. Available in aerosol spray can. See Properties, Specification
Sheet or Material Safety Data Sheet (MSDS).
Available in Aerosol Exceeds Sept VOC Regs.
|
|
Crete-Lease 880-Xtra Release Agent
|
Excellent appearance of concrete, superplasticized concrete, vegetable/mineral oil based. See Specification Sheet or Material Safety Data Sheet (MSDS). Exceeds Sept VOC Regs. |
| Crete-Lease 880 Release Agent | For CCS 1 or CCS 2 surface. Unsurpassed for eliminating
bugholes even with superplasticized concrete. Typically covering 2,000 square feet per
gallon, its applied cost reduces your release agent costs by as much has 75%. See Properties, Specification Sheet
or Material Safety Data Sheet (MSDS). Exceeds Sept VOC Regs. Como utilizar Cresset 727 y Cresset 880 Desencofrante
|
| Crete-Lease 727-Xtra Release Agent
|
Meets OSHA, EPA and the lowest VOC rules. Cleans forms, good looking concrete, vegetable/mineral oil based. Use with superplasticized and SCC concrete. See Specification Sheet or Material Safety Data Sheet (MSDS). Exceeds Sept VOC Regs. |
| Crete-Lease 727
Release Agent
|
For CCS 2 or CCS 3 surface; reduces bugholes, helps keep
forms clean...especially aluminum forms; meets VOC regulations. See Properties, Specification
Sheet or Material Safety Data Sheet (MSDS). Exceeds Sept VOC Regs. Como utilizar Cresset 727 y Cresset 880 Desencofrante
|
Super Strip® Form Releasers...an inexpensive substitute for Crete-Lease:
| Super-Strip "AquaBlend" Form Releaser | Our newest concentrate. Dilute 1 gallon
(or liter) with up to 4 gallons (or liters) of water. When properly
used, produces very good looking concrete surfaces on most types of forms
and it is inexpensive. See Properties, Specification
Sheet or Material Safety Data Sheet
(MSDS).
Exceeds Sept VOC Regs.
|
| Super-Strip 65 Form Releaser | An environmentally friendly, general purpose release agent
for use on plywood (B/B, pre-oiled, etc.) and aluminum wall forms. See Properties, Specification Sheet
or Material Safety Data Sheet (MSDS). Exceeds Sept VOC Regs.
|
| Super-Strip 600 Concentrated Form Releaser | Dilute this concentrate with up to 10 parts of diesel oil. It produces concrete surfaces almost as good as Crete-Lease 727. A very good "overall" form release agent. See Properties, or Specification Sheet. Does not meet Sept VOC Regs. This product is not for sale in the US or its territories. |
Specific Purpose Release Agents:
| Crete-Lease
810-Xtra Release Agent |
For use on pipe pallets and rings. See Properties,
Specification Sheet
or Material Safety Data Sheet (MSDS).
Exceeds Sept VOC Regs.
|
| Crete-Lease
"Latex" Mold Release
|
A castor oil and alcohol mixture for use with natural rubber latex molds. Helps you produce blemish-free, textured and decorated concrete. See Properties, Specification Sheet or Material Safety Data Sheet (MSDS). Available in Aerosol |
Bond Breaker:
| Crete-Lease "Bond Breaker"-Xtra for Tilt-Up | For tilt-up, meets VOC rules, virtually no
stirring. See Properties,
Specification Sheet or Material
Safety Data Sheet (MSDS). Exceeds Sept VOC Regs.
|
| Form Sprayers | Selection of compressed air, electrical and manual sprayers
designed for applying release agents for producing architectural concrete surfaces.
|
| Precasters and Contractors Prefer Cresset Brands | A brand perception study indicates that precasters,
prestressors and contractors prefer Cresset release agents or form oils for concrete
construction. Free sample of water based Crete-Lease
20-VOC.
|
| CSI Specification | Cresset's non-proprietary 3-part CSI Specification for producing architectural
grade concrete surfaces. A free 3.5 inch disk containing this Specification in Word,
WordPerfect, and ASCII formats is offered here. Requires CCS guide.
|
| Release Agents Booklet | What are Release Agents? How do they work? Discusses types,
application methods, VOCs, etc. (19 pages)
|
 Test Your Form Oil
|
Do it yourself "tests" to evaluate your current form release agents. |
|
For Additional Browsing:
Form Release Agents Cures Seals Etc. Form Treatments Testimonials Contacts Specs MSDS Properties Form Sprayers Order FREE Literature Cleaners Instructional Literature Regulations Trade Shows Related Industry Links Aerosols
Copyright © 2008, Cresset Chemical Company.
All rights reserved.
