Super Strip 65 Specification Sheet

CRESSET CHEMICAL COMPANY

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

SPECIFICATION SHEET SUPER-STRIP 65 FORM RELEASER

Super-Strip 65 is an environmentally friendly version of Super-Strip 60 for use on plywood (B/B, pre-oiled, etc.) and aluminum wall forms. Meets VOC regulations in all states.Updated May 2007.

Environmental Report Card Non-toxic.................Yes Non-flammable.............Yes Non-carcinogenic..........Yes VOC compliant.............Yes Solventless...............Yes

1. PRODUCT
Super-Strip 65 Form Releaser

2. MANUFACTURER
Cresset Chemical Company, Inc. One Cresset Center, Box 367
Weston, OH 43569 800-367-2020 USA & Canada
419-669-2041
(Fax) 419.669.2200
www.cresset.com
cresset@cresset.com

3. PRODUCT DESCRIPTION
Basic Use: Super-Strip 65 Form Releaser permits removal of forms, formliners, pallets, etc. from hardened concrete. It:

Helps minimize clean-up of forms and equipment
Sprays better in winter than Super-Strip 55
Testing proves Super-Strip 65 meets CA, OTC and Federal VOC regulations
Promotes easy form stripping
Is non-staining when used properly
Properly applied, does not "kill" concrete surfaces
Good on aluminum forms
Does not cause efflorescence

Limitations: Not recommended for forms or formliners made from expanded polystyrene, SBR, or natural rubber or latexes made of these. Use Crete-Lease 20-VOC on any form or formliner. Super-Strip 55 gets quite thick in the cold months. Super-Strip 65 is winterized to make spraying easier.

Ground Shipping in the USA: Containers holding 55 gallons or 5 gallons or less (regardless of quantity) are not federally regulated and shipping product in the Cresset package does not require following hazardous shipping requirements. A container holding 275 gallons or a bulk shipment requires federally mandated procedures on the driver, container and shipping papers. See Cresset brochure "Ground Shipping" for details.

4. TECHNICAL DATA
Please see Tables.

TABLE OF PROPERTIES

		`Metric`
`Color`	Dark	`Dark`
`Opacity`	Clear	`Clear`
`"Freeze" Temperature`	`-10°F`	`-12°C`
`Freeze Damage`	`None`	`None`
`Flash Point`	`175°F`	`79°C`
`Viscosity (centipoises)`	`25 @ 68°F`	`25 @ 20°C`
`Density`	`7.2 lbs/gal`	`862 g/L`
`VOC (Volatile Organic Compounds)`	`250 g/L`	`250 g/L`
`Solids`	`None`	`None`
`Specific Gravity`	`0.86`	`0.86`

Composition: A proprietary blend of vegetable oils in petroleum based oils. Contains no silicones...no carcinogens.

TABLE OF FORM AND FORMLINER COMPATIBILITY

`Plywood`	`All Grades, Pre-oiled, Overlaid (LDO, MDO, HDO)`
`Plastics`	`Fiberglass Reinforced, ABS, PVC`
`Coatings`	`Epoxy, Urethane`
`Elastomerics`	`Urethane, Silicone`
`Steel`
`Aluminum`
`Wood`

COVERAGE WITH SUPER-STRIP 65

`Form Surface`	`(sq ft/gal)`	`(m2/l)`
`Hard & Smooth`	`1,000`	`25`
`Pre-oiled Plywood`	`600`	`15`
`Untreated Plywood`	`500`	`12`

5. APPLICATION
Preparatory Work: Form surfaces should be clean, dry and free from contaminants. Apply Super-Strip just minutes before concrete is placed or up to 7 days if treated surface is protected.

Apply with any type applicator or technique. Use a sprayer, roller, brush, or mop.

Too much release agent will cause bugholes (as seen in CCS 6), concrete build-up, soft spots, staining, and an increased difficulty in stripping.

Spraying problems (thickening of the form releaser) caused by temperatures 50°F can be minimized by increasing spray pressure by about 10 psi. At lower temperatures it may be wise to use a larger spray tip...say 8005.

Attain CCS 2 with Crete-Lease 880, Crete-Lease 880-VOC, Crete-Lease 727 or Crete-Lease 20-VOC.

Storage: Factory sealed containers will keep up to 2 years at temperatures from -20° F to 140° F (-30° C to 60° C). Super-Strip 65 is a class 3A liquid for purposes of meeting OSHA storage requirements (Section 1910.106).

Precautions: Keep out of reach of children. Avoid prolonged contact with the skin. Use with adequate ventilation. See Material Safety Data Sheet for additional information.

6. AVAILABILITY AND COST
Availability: Super-Strip 65 is available in new 1 and 5 gallon containers; new 55 gallon drums and 275 gallon MegaPaks. Contact Cresset Chemical Company for your nearest distributor.

Cost: The cost on hard, smooth surfaces is about $0.006 per square foot (January 2007).

7. LIMITED WARRANTY
Cresset Chemical Company warrants the product against defects in materials for a period of 1 year from purchase. If Cresset receives notice of such defects during the warranty period, Cresset at its option will either replace the product or refund the purchase price. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. CRESSET SPECIFICALLY DISCLAIMS THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL CRESSET CHEMICAL COMPANY BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFIT) WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY.

8. MAINTENANCE
Not required.

9. TECHNICAL SERVICES
Cresset Chemical Company specializes in developing, distributing and servicing release agents. Our technical support includes assistance in optimizing concrete mixtures for achieving architectural surfaces; release agent compatibility with superplasticizers, coatings, form facings, etc.; and solving other concrete surface blemish problems.

Free literature includes:

Catalog of Products
Material Safety Data Sheets
"Cresset Concrete Standards" (Application techniques to obtain high visual impact concrete surfaces)
"Surface Voids and How to Eliminate Them"

Over 75 distributors in the United States, Canada, Australia and Germany to serve you. Your technical inquiries are welcome, please call, write or FAX.

For the most up-to-date copy please download from Cresset Chemical Company's web site, www.cresset.com, or contact us for a printed copy.

Super-Strip 65 MSDS

Other Specification Sheets:
Index of All Cresset's Specification Sheets
Crete-Lease 20-VOC Release Agent (Water Based)
Crete-Lease 880-VOC Release Agent
Crete-Lease 880 Release Agent
Crete-Lease 727 Release Agent
Crete-Lease 810 Release Agent
Super-Strip 44 Form Releaser
Super-Strip "AquaBlend" Form Releaser
Super-Strip 60 Form Releaser
Super-Strip 600 Concentrated Form Releaser
Crete-Lease "Latex" Mold Release - Aerosol
Crete-Lease "Bond Breaker" for Tilt-Up

For Additional Browsing:
CCS (Cresset Concrete Standards)
3 Part CSI Specification
All Release Agents Summary of Properties

Form Release Agents    Cures  Seals  Etc.    Form Treatments    Testimonials    Contacts

Specs  MSDS  Properties     Form Sprayers    Order FREE Literature    Cleaners

Instructional Literature   Regulations   Trade Shows   Related Industry Links   Aerosols

Return to Release Agent Page

Cresset Home Page

Cresset is a trade mark of Cresset Chemical Company.